Custom Fabrication of Microfluidics

Review the materials and design rules below, fill-in the form at right and submit your drawing , even if its just a schematic! We’ll get back to you within 24 hours with questions or a quote. Delivery within 7-10 business days.

Read about Options and Pricing in our Custom Fab Brochure

Materials Selector, Design Rules, Connector and Reservoir Options

Materials Selector

  • Stocked materials listed, alternate materials can be sourced
  • Optical Materials come supplied with protective films on both sides have low haze
  • ALine recommends using Acrylic for thick layers (0.020” or greater), PET for thin layers (0.010” and thinner), and Silicone PSA (0.001” or 0.002”) for bonding if no materials requirements are known. These materials work in a large range of applications and are low cost, come in a variety of thicknesses, and have well characterized processing parameters

Design Rules Table 1: Standard Minimum dimensions

(1) Designs at process minimums will have to be reviewed and approved by engineer

Design Rules Table 2: Standard Tolerances

(1) Designs at process minimums will have to be reviewed and approved by engineer

Complete the form to get the fastest service. Or click the button above to call us.

Contact info

CAPTCHA image

* These fields are required.